Important Safety Instructions

Please read and follow these instructions carefully before installing or operating any Trinnov equipment. They contain essential information to ensure safe use, protect the equipment from damage, and prevent risk of injury or electrical hazards.

• Read these instructions.
• Follow all instructions.
• Install the apparatus on a solid, flat, level surface that is dry, well ventilated and out of direct sunlight.
• Do not use this apparatus near water.
• Clean only with a dry cloth. Do not use liquid solvent-based cleaners.
• Protect the detachable power chord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. If the accord becomes damaged, do not use it. Immediately replace it with a new one of the same or better rating.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Do not open the equipment case or remove any of the cover panels. There are no user serviceable of this product. Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not allow liquids to spill or objects to fall into any openings of the product.
• Use only attachments/accessories specified by the manufacturer.
• Do not defeat the safety purpose of the polarized or ground ing-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Before connecting the equipment, check that the main power supply voltage rating corresponds with the local main power supply. The rating of the main power supply voltage is printed on the equipment.
• If replacement of the ac line fuse and/or any internal fuse becomes necessary, replace only with the same value and type of fuse provided on the product pages of our website. Never bypass the fuse.
• It is imperative that the apparatus be operated in a well ventilated environment and the immediate external temperature be maintained as specified. Do not expose the apparatus to humidity, steam, smoke or excessive dampness or dust. Maximum permissible operating conditions: 0°C to 40°C, 20-65% relative humidity. External cooling fans may be required in some cases.
• Do not stack any equipment directly above or below the apparatus to protect it from overheating, as well as the continued functionality of any equipment near and around it.
• To completely disconnect the apparatus from the AC, completely remove the power cable from the main outlet.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug in damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
• Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
• The main plug of the power-supply cord shall remain readily operable.
• Do not expose batteries to excessive heat such as sunshine, fire or the like.